Оборудование для автоматизации Системы умный дом
Базовый модуль актуатора RMG 4 C-Load EIB/KNX Mix, 4-канальный, расширение до 12 каналов, монтаж на DIN рейку, IP 20
Код товара: 47641
Артикул: TN:4910206
Базовый модуль актуатора RMG 4 C-Load EIB/KNX Mix, 4-канальный, расширение до 12 каналов, монтаж на DIN рейку, IP 20
Цену уточняйте
*Цены на сайте не являются офертой и носят ознакомительный характер, для уточнения актуальности цены вы можете связаться с оператором.
RMG 4 C-Last EIB/KNX Mix 4-х канальный базовый модуль актуатора. N/O потенциальнонезависимые контакты.16А/ 250V cos=1, 16А/250V cos=0,6. Светодиодная индикация для каждого канала. Ручное переключение OFF-BUS-ON. Объкт обратной связи для каждого канала, центральные объекты. Режимы: Вкл/Выкл, цикличное вкл/выкл, ВКЛ/ВЫКЛ с задержкой, отключение с предупреждением. Логические функции: Disable (блокировка), АND (И), OR (ИЛИ), ENABLE (разрешить). Запись и вызов 8 сцен. Расширение до 12 каналов. Установка на ДИН-рейку. 10мА (с двумя модулями расширения)
4-way C load switching actuator MIX
For higher lamp loads
Basic module MIX
Can be upgraded to maximum of 12 channels
Up to 2 extension modules can be connected to a basic module
Can be combined with all MIX series devices
Free combination of switches, dimming, blinds and heating control as well as binary inputs
LED switching status display for each channel
Manual switch with On/Off/Bus settings (also without bus voltage)
Adjustable characteristics: e.g. switching, delayed switching, pulse function
Switching functions: e.g. On/Off, pulse, On/Off delay, staircase light with warning
Logical links: e.g. lock,AND, release, OR
Operating voltage KNX Bus voltage, 10 mA
Operating voltage 230 V AC
Frequency 50 Hz
Stand-by consumption 2 W
Installation type DIN rail
Width 4 modules
Type of connection KNX bus terminal
Max. cable cross section Solid wire: 0.5 mm ( 0.8) to 4 mm | Stranded wire with end sleeve: 0.5 mm to 2.5 mm
Number of channels 4
Type of contact NO contact, 16 A, 16 A
Opening width < 3 mm
Resistive load 3680 W
Capacitive load 200 µF
Incandescent lamp load 3680 W
Halogen lamp load 3680 W
Fluorescent lamp load (conventional) lead-lag circuit 3680 W
Fluorescent lamp load (conventional) parallel-corrected 2500 W (200 µF)
Fluorescent lamp load (conventional) not corrected 3680 W
Voltage output 230 V AC
Frequency output 50 – 60 Hz
Switching output Potential-free
Switching of various phases Possible
Suitable for SELV Yes if all channels switch at SELV
Ambient temperature -5 °C … +45 °C
Type of protection IP 20
Protection class II according to EN 60 730-1
4-way C load switching actuator MIX
For higher lamp loads
Basic module MIX
Can be upgraded to maximum of 12 channels
Up to 2 extension modules can be connected to a basic module
Can be combined with all MIX series devices
Free combination of switches, dimming, blinds and heating control as well as binary inputs
LED switching status display for each channel
Manual switch with On/Off/Bus settings (also without bus voltage)
Adjustable characteristics: e.g. switching, delayed switching, pulse function
Switching functions: e.g. On/Off, pulse, On/Off delay, staircase light with warning
Logical links: e.g. lock,AND, release, OR
Operating voltage KNX Bus voltage, 10 mA
Operating voltage 230 V AC
Frequency 50 Hz
Stand-by consumption 2 W
Installation type DIN rail
Width 4 modules
Type of connection KNX bus terminal
Max. cable cross section Solid wire: 0.5 mm ( 0.8) to 4 mm | Stranded wire with end sleeve: 0.5 mm to 2.5 mm
Number of channels 4
Type of contact NO contact, 16 A, 16 A
Opening width < 3 mm
Resistive load 3680 W
Capacitive load 200 µF
Incandescent lamp load 3680 W
Halogen lamp load 3680 W
Fluorescent lamp load (conventional) lead-lag circuit 3680 W
Fluorescent lamp load (conventional) parallel-corrected 2500 W (200 µF)
Fluorescent lamp load (conventional) not corrected 3680 W
Voltage output 230 V AC
Frequency output 50 – 60 Hz
Switching output Potential-free
Switching of various phases Possible
Suitable for SELV Yes if all channels switch at SELV
Ambient temperature -5 °C … +45 °C
Type of protection IP 20
Protection class II according to EN 60 730-1
Техническое описание
pdf, 370.83 Кбайт
